seal gasket(SWG gasket)

seal gasket: excellent performance under fluctuating temperature, high pressure condition, good anti-corrosion merit

 gasket: 

Consists of "v-shape"(or"w-shape") metal tape  and nonmetal  tape,which  are overlapped each other  and wound continuously. To  fasten  the  metal tape,both  its  start  point  end  point  are tack  welded.

Features:

1.Wide  range of applicable  working  condition,high temperature  and  high  pressure  resistance. applicable  to super  low temperature  and vacuum  condition. chemical  resistant  gasket is available  under  various  medium,through  change  of  composition  of gasket.

2.Strong strees  compensation.   stable and reliable  sealing  performance  even  under  frequent  pressure  fluctuation  condition .

3.Perfect sealing  performance.

4.Normal  requirment  of  flange surface finishing  which  contact with gasket.

5.Easy installation  and  low pre-tightening  stress  of  gasket.

Kinds  of  gasket:

1.A.  spiral  wound  gasket  consists  of  four  types:basic  type,with   inner  ring,with  outer    ring,and  with inner  and  outer  rings.

 B.heat exchanger spiral wound  gasket:basic  type  and  with  inner  and  outer  rings

2.Normally  material  used:

A.Steel tape :08F

ocr13,ocr18Ni9Ti.1Cr18Ni9Ti(321).ocr17Ni12,M02(316),and  0Cr17Ni14M02(316L)

B.(Cold  roll)steel   plate  for  inner  and  outer  ring:

Outer  ring "mild  steel ,ocr13  and  OCr18Ni9

Inner  ring:same  as  steel ,special  order  is  available  through  negotiation.

C.Normetal  tape:flexible  graphite,special  made  asbestos,teflon and  non-asbestos  paper.

Scope  of  Application:

1.Working  temperarure:-196~700(Not  higher than 600   in oxidic  medium)

2.Working  pressure:<=25MPa

3.Gasket  coefficient:m=2.5~4

4.Min.pre-tightening   specific   pressure:y=68MPa

5.Max.machinable  size:~2800

seal gasket(SWG gasket)